To access the electronics of your Conquer Under Desk Treadmill is quite simple.


Before beginning make sure your treadmill is turned off and unplugged from the power outlet.


To start there are 2 screws on either side of the main display that need to be removed.



Next there is a single screw in the rear of the unit and two rubber stoppers that need to be removed.



Now you should have 5 screws and 2 rubber stoppers removed from the treadmill



Now you can slowly pull off the top plate, be careful because the display has the plug hot glued, if its yanked on it could damage the display.



You now have access to all the internals of your machine for inspection and any maintenance you need to perform.


To reinstall the top plate simply place it back into its proper spot, reinstall the rubber stoppers to be sure its in the correct position and screw the 5 screws back in.